Solved: Router Basics

nick050576 · ‎10-16-2008

Hi,

I apologise for the basic question, but I am just strating to try and learn some Cisco.

I am setting up a 1700 series router. Everytime I reload the router it starts up again with none of my config (I have done "copy running-config startup-config). I do a show startup-config and all my changes are there. Why doesnt it work in running config?

Thanks in Advance

Joe Clarke · ‎10-16-2008

Check the value of your config-register in show version. It should be 0x2102. If it is, for example, 0x2142, that would explain why the router is ignoring NVRAM when it boots.

View solution in original post

Joe Clarke · ‎10-16-2008

Check the value of your config-register in show version. It should be 0x2102. If it is, for example, 0x2142, that would explain why the router is ignoring NVRAM when it boots.

nick050576 · ‎10-16-2008

Hi, It shows as 0x142...

How do I change this..

Thanks

nick050576 · ‎10-16-2008

Sorted, changed it..

Thanks again