Here's my problem:
I have a sup32 running in a 6513 switch running in native mode. My boot var is set to BOOT=sup-bootdisk:s3223-adventerprisek9_wan-mz.122-18.SXF8.bin and my config register is 0x02102.
When I reload the switch autoboot tries to open the image with this statement âboot bootdisk: s3223-adventerprisek9_wan-mz.122-18.SXF8.binâ but fails with an error stating
open(): Open Error = -13
loadprog: error - on file open
From there it goes directly into rommon. From rommon if I issue the exact same statement âboot bootdisk: s3223-adventerprisek9_wan-mz.122-18.SXF8.binâ it works fine and loads the image. Also if I change the BOOT variable to BOOT= s3223-adventerprisek9_wan-mz.122-18.SXF8.bin leaving out the bootdisk part and reload it works as well.
I just can't seem to understand why autoboot has a problem with the bootdisk: portion of the command. Rommon can read from bootdisk: just fine.