10-16-2008 01:05 PM - edited 03-06-2019 01:58 AM
Our customer bought 10 Mbps Metro Ethernet services from the SP on a Gigabit Ethernet port and they are running into issues when they try shaping the Gigabit Ethernet port to 10Mbps.
Has anyone encountered a similar problem ?
Any feedback would be appreciated
10-16-2008 04:59 PM
The regular 3750 switch support SRR Shaping, please follow the documentation:
If you have the 3750 Metro, then you can configure hierarchical QoS
HTH,
__
Edison.
10-16-2008 05:08 PM
Thanks Edison for your response. I looked at these configuration documents. Actually the Customer is seeing a specific problem where on a 1000 Mbps port he is able to shape to say 100/ 500 Mbps but when he tries to shape that port to very low values like -- 10 Mbps etc that he is running into issues.
I was wondering if there is a lower limit on a Gig pot to what value can it be shaped
10-16-2008 06:00 PM
Normal 3750 ports only support shaping in tiers (multiples of 6?), although the shape command allows 1% increments. I.e. you can't actually obtain the exact percentage you shape for.
If possible, hard code the port for 10 or 100, and then shape.
10-17-2008 07:50 AM
Thanks Joseph
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide