NEC PBX Interaction with Cisco Call Manager

Unanswered Question
Oct 16th, 2008
User Badges:


We have a new building that we want to connect to our network and thinking of Callmanager to be installed and linking it to our NEC PBX.

Need some pointers on how am I going to go about doing that. Documents and examples will be really appreciated

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 3 (1 ratings)
testeven Fri, 10/17/2008 - 09:47
User Badges:
  • Cisco Employee,


Here are some documents that might help:

*** NEC 2400 ICS PBX with CallManager using 3640-T1 MGCP Gateway ***

*** Cisco Unified CallManager Release 5.0-PBX Interoperability: NEC IPX2400 R15 to a Cisco CMM Using T1-PRI QSIG with MGCP ***

The second link includes info on SW and HW requirements as well as features supported.

*** Cisco Unified CallManager Release 5.0-PBX Interoperability ***

HTH, if it does please rate!

Tere :)

utawakevou Mon, 10/20/2008 - 13:57
User Badges:

Thank you very much. This really helps. Anyway our PBX is a NEC NEAX 2000 IVS2. Quite old :(


jpdenkiewicz Tue, 10/28/2008 - 06:23
User Badges:


I have to connect CUCM 6.1 con NEC IPX2400 R22. I saw your link, but only talk about Release 15.

Is there a new link to understand how should connect to NEC PBX using Release 22? Thanks!!


This Discussion