NEC PBX Interaction with Cisco Call Manager

utawakevou · ‎10-16-2008

Hi,

We have a new building that we want to connect to our network and thinking of Callmanager to be installed and linking it to our NEC PBX.

Need some pointers on how am I going to go about doing that. Documents and examples will be really appreciated

testeven · ‎10-17-2008

Hi!

Here are some documents that might help:

*** NEC 2400 ICS PBX with CallManager using 3640-T1 MGCP Gateway ***

*** Cisco Unified CallManager Release 5.0-PBX Interoperability: NEC IPX2400 R15 to a Cisco CMM Using T1-PRI QSIG with MGCP ***

The second link includes info on SW and HW requirements as well as features supported.

*** Cisco Unified CallManager Release 5.0-PBX Interoperability ***

HTH, if it does please rate!

Tere :)

Regards, Tere. If you find this post helpful, please rate! :)

utawakevou · ‎10-20-2008

Thank you very much. This really helps. Anyway our PBX is a NEC NEAX 2000 IVS2. Quite old :(

Thanks

jpdenkiewicz · ‎10-28-2008

Hi!

I have to connect CUCM 6.1 con NEC IPX2400 R22. I saw your link, but only talk about Release 15.

Is there a new link to understand how should connect to NEC PBX using Release 22? Thanks!!