CUCM 6.X or 7.0: Advice of Charge information displayedon the IP-Phone scre

mfasano · ‎10-17-2008

Hi!

Just a recurrent question to all related to the Advice of Charge information ... ;-)

Do you know if there is now the possibility to display the ISDN Advice of Charge information on the IP-Phone display during an outgoing call on the PSTN? This feature is every time asked from our customers in Switzerland and for years we are looking for a solution....

One of our current prospects has defined this feature as a mandatory requirement and we don't want to miss this interesting opportunity just because of this not supported Advice of Charge feature. Does one of you know a solution?

That's a trace of the information we are receiving from the ISDN

provider: we just need to display this ISDN "Display i = 'FR. 0.10'"

Facility information on the IP-Phone each time it has been updated from the provider. Could it be possible to use a TCL script or something similar?

#########################################

*Oct 16 21:13:44.980: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 i

s 0x0 0x0, Calling num 216377627

*Oct 16 21:13:44.980: ISDN Se0/0/0:15 Q931: Applying typeplan for sw-type 0x12 i

s 0x0 0x0, Called num 0796323721

*Oct 16 21:13:44.980: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8 callref = 0x0015

Bearer Capability i = 0x8090A3

Standard = CCITT

Transer Capability = Speech

Transfer Mode = Circuit

Transfer Rate = 64 kbit/s

Channel ID i = 0xA9839F

Exclusive, Channel 31

Calling Party Number i = 0x0081, '216377627'

Plan:Unknown, Type:Unknown

Called Party Number i = 0x80, '0796323721'

Plan:Unknown, Type:Unknown

*Oct 16 21:13:45.052: ISDN Se0/0/0:15 Q931: RX <- SETUP_ACK pd = 8 callref = 0x

8015

Channel ID i = 0xA9839F

Exclusive, Channel 31

*Oct 16 21:13:45.500: ISDN Se0/0/0:15 Q931: RX <- CALL_PROC pd = 8 callref = 0x

8015

*Oct 16 21:13:49.880: ISDN Se0/0/0:15 Q931: RX <- ALERTING pd = 8 callref = 0x8

015

Progress Ind i = 0x8288 - In-band info or appropriate now available

*Oct 16 21:13:53.280: ISDN Se0/0/0:15 Q931: RX <- CONNECT pd = 8 callref = 0x80

15

Display i = 'FR. 0.10'

Date/Time i = 0x080A101628

Connected Number i = 0x00A3

*Oct 16 21:13:53.284: ISDN Se0/0/0:15 Q931: TX -> CONNECT_ACK pd = 8 callref =

0x0015

*Oct 16 21:13:53.284: ISDN Se0/0/0:15 Q931: RX <- FACILITY pd = 8 callref = 0x8

015

Facility i =

0x91A11B02024E850201213012A10D810346522EA20681010A820101820

100

- ETSI Supplementary Service, Invoke, AOC-D Currency

*Oct 16 21:13:59.280: %ISDN-6-CONNECT: Interface Serial0/0/0:30 is now connected

to 0796323721

*Oct 16 21:14:18.268: ISDN Se0/0/0:15 Q931: RX <- INFORMATION pd = 8 callref =

0x8015

Display i = 'FR. 0.20'

*Oct 16 21:14:18.276: ISDN Se0/0/0:15 Q931: RX <- FACILITY pd = 8 callref = 0x8

015

Facility i =

0x91A11B02024E860201213012A10D810346522EA206810114820101820

100

- ETSI Supplementary Service, Invoke, AOC-D Currency

*Oct 16 21:14:38.272: ISDN Se0/0/0:15 Q931: RX <- INFORMATION pd = 8 callref =

0x8015

Display i = 'FR. 0.30'

*Oct 16 21:14:38.276: ISDN Se0/0/0:15 Q931: RX <- FACILITY pd = 8 callref = 0x8

#########################################

Many thanks in advance for much appreciated help

Kind Regards

Marco

terdogan · ‎10-17-2008

Hey,

CUCM supports displaying AOC with MGCP gateways, as long as the PSTN actually sends the actual amount (as in your case) and not units.

Are you using H.323 or MGCP GWs?

Cheers,

Tolga

mfasano · ‎10-21-2008

Hey Tolga,

Many thanks for your answer. Yes I will use MGCP if this AOC feature is supported. But we tested it and only the first Facility Information announcement is displayed on the CP-79XX display but any other update is transmitted... As long as heard and read... this AOC feature is not supported by the CUCM and is not planned to be supported in the current development roadmap... I think that only European customers and integrators need it and unfortunately Europe is not the center of the world for Cisco UC Business Unit... :-(

If you have more details regarding roadmaps and the support of this feature, many thanks in advance to transmit them to me.

Kind Regards

Marco