pbr in Asa firewall version 8.0

Unanswered Question
Oct 17th, 2008

Hi Team,

local lan has the gateway as firewall inside ip. there is a 3750 L3 switch in between lan and firewall. now if we give the default gateway as firewall ip we [192.168.4.x] are unable to ping to 192.168.6.x network. But if we give the gateway as switch vlan ip [192.168.4.2] we are able to ping.

can we do some kind of routing/policy based routing in firewall with version 8.0

regards

Rajesh P

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Farrukh Haroon Sat, 10/18/2008 - 23:19

You just need to add a static route on the ASA

route 192.168.6.0 255.255.255.0

Then

same-security-traffic permit intra-interface.

If nat-control is enabled, then you need to add NAT as well.

Regards

Farrukh

Actions

This Discussion