message ss7

Unanswered Question
Oct 17th, 2008

We have already the configuration of the AS5400 and PGW2200 with ss7 and the PSTN and PLMN;

assigning a trunk of channels for different clients. In this way, we configure a trunk with

just 2 channels to the PLMN, but the error happen for the third simultaneous call, because

we listen the next message from the PSTN: "... the number you dial don't exist, plesase

try again...." we are looking for a message like a busy tone or a congested network message.

Please support us.

I attach a file with the log obtained from the ss7 analyzer between PSTN and PGW.

Thanks in advance

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
vmoopeung Thu, 10/23/2008 - 09:13

If your DN is in VACANT state it shows a typical announcement “"The number you dialed is not in service. Please check the number and try again." The cause code for this state is #1.There must be a problem with the configuration of call routing.


This Discussion