ATA reboot

ricardorojas123 · ‎10-20-2008

I have the cisco call manager version 6 and the ATA reboot once a week. Why is this happening?

tim.giles · ‎10-20-2008

Hi,

Can you tell me what firmware the ATA is using?

There is possibly a problem in firmware prior to version 3.

There is also a known bug which may be relevant?:

CSCso94320 Bug Details

TFTP procedure causes ATA reboot

Symptom:

ATA does an unexpected reboot, and see infinite tftp request at preserv log

Conditions:

ATA enables both channel, but CCM disables auto register and only config one channel.

Workaround:

Disable the second channel to stop infinite tftp request

Is there any more information in the CCM trace files (get them from RTMT - Real-Time Monitoring Tool)

Please rate useful posts...

neoxbusnext · ‎11-11-2008

how to disable second FXS on ATA

Rob Huffman · ‎11-11-2008

Hi Somsak,

Here is the process;

Note By default, both Cisco ATA FXS ports are enabled for Cisco CallManager registration. If you do not want to add the Phone 2 FXS port to Cisco CallManager, you must change the Cisco ATA EPID1orSID1 parameter value to 0 to disable the Phone 2 port. (To disable the Phone 1 port, you must change the EPID0orSID0 parameter value to 0.)

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpach4.html#wpxref70796

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaape.html#wp1020682

http://www.cisco.com/en/US/docs/voice_ip_comm/cata/186_188/2_15_ms/english/administration/guide/sccp/sccpaape.html#wpxref65796

Hope this helps!

Rob

neoxbusnext · ‎11-11-2008

hi Rob

thank you so much