10-20-2008 12:46 PM - edited 03-11-2019 07:00 AM
Good Afternoon:
Someone know if i can get reports from the Cisco Security Manager, as mayor port's used, mayor rules used, mayor denys, an graphics?
If not is posible wich software can do it?
10-20-2008 09:52 PM
MARS would be the number one choice if your firewall is from Cisco. Juniper also has a SIM now. This is from a previous post:
Have you looked at Cisco MARS? (Its actaully a SEM)
http://www.cisco.com/en/US/products/ps6241/products_data_sheets_list.html
http://www.sawmill.net/features.html
(Found it to be pretty nice, but might be pricy)
If you want a real-time thing, fireplotter is pretty cool:
Alternates:
http://manageengine.adventnet.com/products/firewall/
(never tried it tough)
http://www.eventid.net/firegen/firegenpix2.asp
(had serious performance issues)
Some more:
http://www.windowsecurity.com/software/Firewall-security-log-analyzers/
Please rate if helpful
Regards
Farrukh
10-21-2008 05:06 AM
Thanks very much. I see this recomendations.
Cordially
Hector
10-21-2008 05:17 AM
Thank's Farrukh:
Maybe you know some software freeware?.
Thank's in advanced.
10-21-2008 05:23 AM
You can get an evaluation version of fireplotter or others. It works without some advanced features.
The problem is that netflow is only supported on the high end ASA boxes, otherwise there are a few free netflow collectors out there.
Regards
Farrukh
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: