10-21-2008 05:20 AM
10-21-2008 09:37 AM
Shutdown the CiscoWorks Daemon Manager, then run:
NMSROOT/bin/perl NMSROOT/bin/restorebackup.pl -d /path/to/backup
If there is a generation number, you also need to specify "-gen NUMBER". For example, on Windows:
C:\PROGRA~1\CSCOpx\bin\perl C:\PROGRA~1\CSCOpx\bin\restorebackup.pl -d C:\backups
Solaris:
/opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /backups/lms
10-21-2008 10:01 PM
This backup procedure works for all applications except IPM. For IPM, you will need to run the "ipm dbrestore" command.
PROGRA~1 is the DOS 8.3 abbreviation for "Program Files". You should always use the 8.3 path names when working with LMS on Windows. C:\PROGRA~1\CSCOpx is the default location where LMS is installed on Windows. The example commands I posted are complete commands. You would only need to adjust them for the paths used on your server.
10-21-2008 09:37 AM
Shutdown the CiscoWorks Daemon Manager, then run:
NMSROOT/bin/perl NMSROOT/bin/restorebackup.pl -d /path/to/backup
If there is a generation number, you also need to specify "-gen NUMBER". For example, on Windows:
C:\PROGRA~1\CSCOpx\bin\perl C:\PROGRA~1\CSCOpx\bin\restorebackup.pl -d C:\backups
Solaris:
/opt/CSCOpx/bin/perl /opt/CSCOpx/bin/restorebackup.pl -d /backups/lms
10-21-2008 09:47 PM
Hi
this solution is applicable for all LMS versions.plse mention the backup procedure also.
plse re-write this command more clearlly.
PROGRA~1 WHAT DOES THIS MEAN,PLSE SPECIFY FULL COMMAND.
Regards
Vaibhav
10-21-2008 10:01 PM
This backup procedure works for all applications except IPM. For IPM, you will need to run the "ipm dbrestore" command.
PROGRA~1 is the DOS 8.3 abbreviation for "Program Files". You should always use the 8.3 path names when working with LMS on Windows. C:\PROGRA~1\CSCOpx is the default location where LMS is installed on Windows. The example commands I posted are complete commands. You would only need to adjust them for the paths used on your server.
10-21-2008 10:31 PM
Thanks a lot for all those information.
plse let me know the exact procedure for backup in LMS 2.6.
Regards
Vaibhav
10-22-2008 08:45 AM
The backups can be taken through the GUI under Common Services > Server > ADmin > Backup.
10-22-2008 09:39 PM
Thanks a lot...
i have dine the same it works..
Thank you so much.
Regards
Vaibhav
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: