AP 1131AG

Answered Question
Oct 21st, 2008
User Badges:

Hi all, is it possible to disable the light on an AP 1131 AG by software or if not by hardware^


Thanks.


Ben

Correct Answer by Rob Huffman about 8 years 6 months ago

Hi Ben,


Give this a try;


config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.


config ap led-state {enable | disable} {Cisco_AP | all}


Syntax Description

config

Display configurations.


ap

Advanced parameters.


led-state

Enable or disable the LED-State for an access point.


{enable | disable}

Enable or disable the access point's LED-State.


{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.



http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867



Hope this helps!

Rob



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 10/21/2008 - 06:31
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Ben,


Give this a try;


config ap led-state

To enable or disable the LED-State for an access point, use the config ap led-state command.


config ap led-state {enable | disable} {Cisco_AP | all}


Syntax Description

config

Display configurations.


ap

Advanced parameters.


led-state

Enable or disable the LED-State for an access point.


{enable | disable}

Enable or disable the access point's LED-State.


{Cisco_AP | all}

Name of a Cisco lightweight access point or all to specify all access points.



http://www.cisco.com/en/US/docs/wireless/controller/4.1/command/reference/clic1.html#wp2384867



Hope this helps!

Rob



bseguin06 Tue, 10/21/2008 - 07:58
User Badges:

Hi Rob,


Thanks a lot for your help.

You point me in the right direction.

The exact command for this model is :

config led display off


Thanks again and have a good day.

Ben

Rob Huffman Tue, 10/21/2008 - 08:12
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications



Good stuff Ben! Thanks for posting back with your actual results (very helpful my friend :)


Cheers!

Rob

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode