10-21-2008 09:31 AM - edited 03-06-2019 02:03 AM
Hello !!
I have this message in my 7606 router's log:
The bootfile slavec7600s72033-advipservicesk9-mz.122-33.SRB2.bin is not present in standby.
What does it mean ?
How can i fix it ?
Thanks
10-21-2008 10:12 AM
You need to copy the IOS image in the standy Supervisor as well.
HTH,
__
Edison.
10-21-2008 03:32 PM
But the router was operating normally(since 2 months ago), it was not turned off, the IOS has not been changed, nor the register....what can produce such event log ?
10-22-2008 05:22 AM
Perhaps someone deleted the file by accident.
Verify the file is there, if it isn't - please copy it from the active Supervisor to the standby.
HTH,
__
Edison.
10-22-2008 06:11 AM
Hello Edison. Thanks for your responses.
Could you please give me a procedure to follow (including commands) so i can verify if the file exists or not and if not, how to copy ?
I'm just a begginer in my job and my boss asked me to perform this taks (to find out how to do that).
Thanks a lot
10-22-2008 06:32 AM
Please take a moment and read the portion of this document:
It explains several commands regarding the task you are asked to do.
HTH,
__
Edison.
10-22-2008 02:06 PM
Eduard. Hi again.
This is the equipment's sh ver print:
System image file is "bootdisk:c7600s72033-advipservicesk9-mz.122-33.SRB2.bin"
cisco CISCO7606 (R7000) processor (revision 1.0) with 458720K/65536K bytes of me mory.
Processor board ID FOX084000FG
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
23 Virtual Ethernet interfaces
52 Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.
65536K bytes of Flash internal SIMM (Sector size 512K).
Configuration register is 0x2102
I don't really understand how can i copy files from one memory to other.
How can i know how many slots for memory my router has ?
10-24-2008 05:08 PM
My name is Edison.
Please post the output from typing dir /all
__
Edison.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: