AS5350 DTMF works fine from external but not from PBX

Unanswered Question
Oct 21st, 2008
User Badges:

When calling into from an external Phone line (Cell phone,etc) the DTMF works great, every time.


From my office using a ROLM phone dialing out into the Gateway it picks up fine, but the DTMF tones are not recognized but sometimes it is. It is intermittent. I suspect an IOS level related issue. If this is the fix, can you informed me of what IOS level is required to fix the DTMF problem using a PBX.


See attachments for version and running-config.





  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
abdel-moniem Wed, 10/22/2008 - 00:06
User Badges:

Hi


The IOS version is Experiemental Version as it appears, Can you try a stable Validated IOS

Lets say 12.3(11)T7 for example


thanks


ahoude333 Fri, 10/24/2008 - 14:02
User Badges:

Can I use c5350-is-mz.124-6.T11.bin ? And if I can, do I need to install another boot flash file or can I use whatever I have.


I believe I have only 32mb of flash. Will the above IOS be ok to use?


Thanks for all your help.


-Al-


abdel-moniem Sat, 10/25/2008 - 06:09
User Badges:

You can use this IOS but This IOS has a min Flash of 64MB and DRAM capacity of 256MB

Actions

This Discussion