CRC errors on fibre link

Unanswered Question
Oct 21st, 2008

Setting up a link 14KM using SFP-ZX and 10db attenuators on the receive legs. Am getting CRC errors on one end only.Swapped SFP's no difference...any ideas??

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Tom Randstrom Wed, 10/22/2008 - 06:55

You didn't mention what platform you are using. Have you checked to see if there is a Field Notice for this issue on the hardware?

Does the hardware support provisioning of CRC size, as there might be a mismatch? Do you see any other errors? Have you tried to swap the fibers to see if the error follows the fiber link?

Just some thoughts.


This Discussion