10-21-2008 03:24 PM
Setting up a link 14KM using SFP-ZX and 10db attenuators on the receive legs. Am getting CRC errors on one end only.Swapped SFP's no difference...any ideas??
10-22-2008 06:55 AM
You didn't mention what platform you are using. Have you checked to see if there is a Field Notice for this issue on the hardware?
Does the hardware support provisioning of CRC size, as there might be a mismatch? Do you see any other errors? Have you tried to swap the fibers to see if the error follows the fiber link?
Just some thoughts.
12-19-2008 10:16 AM
Have you tried cleaning the connectors?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide