Policy based routing catalyst 3750

Answered Question
Oct 21st, 2008
User Badges:

Hi,


When I want to configure policy based routing. When i want activated it on a vlan interface it won't work.


I don't have the option ip policy route-map


The command policy is not known...


Equipment i'm using is Catalyst 3750. Ios ipbase 12.2(25)SEE4


Best regards


Jorg

Correct Answer by alan.blake about 8 years 4 months ago

whoops.

Correct Answer by Jon Marshall about 8 years 5 months ago

Jorg


You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -


http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html


Jon

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Correct Answer
Jon Marshall Tue, 10/21/2008 - 23:31
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Jorg


You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -


http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html


Jon

jorg.ramakers Wed, 10/29/2008 - 02:50
User Badges:

Hi Jon,


Thanx for the tip. You need indeed enable pbr by the template and it is necessary to run at least ipservices instead of ipbase.


Tnx


Jorg

Actions

This Discussion