Solved: Policy based routing catalyst 3750

jorg.ramakers · ‎10-21-2008

Hi,

When I want to configure policy based routing. When i want activated it on a vlan interface it won't work.

I don't have the option ip policy route-map

The command policy is not known...

Equipment i'm using is Catalyst 3750. Ios ipbase 12.2(25)SEE4

Best regards

Jorg

Jon Marshall · ‎10-21-2008

Jorg

You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html

Jon

View solution in original post

alan.blake · ‎11-13-2008

whoops.

View solution in original post

Jon Marshall · ‎10-21-2008

Jorg

You need to be running the right SDM template on the switch as there are a different number of possible templates. From memory i believe it is the routing template you need. See attached link for template details -

http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_25_sec/configuration/guide/swsdm.html

Jon

jorg.ramakers · ‎10-29-2008

Hi Jon,

Thanx for the tip. You need indeed enable pbr by the template and it is necessary to run at least ipservices instead of ipbase.

Tnx

Jorg

alan.blake · ‎11-13-2008

whoops.