VPN client fails when connecting to a Cisco 2800 router

jmcandelera · ‎10-22-2008

Hello,

I am trying to configure CISCO remote VPN access to a CISCO 2800 router (site B). This router has got a L2L VPN to a CISCO ASA (site A) that is working without problems. I modified 2800 configuration to support remote vpn, but I can't connect from CISCO remote vpn clients to the 2800 router. Could you help me please? I include configuration and logs.

Thanks a lot for your help.

andrew.prince · ‎10-22-2008

You have a few config errors - use the below links to check your config and change where nessary:-

http://www.cisco.com/en/US/customer/products/sw/secursw/ps5318/products_configuration_example09186a00806ad10e.shtml

http://www.cisco.com/en/US/customer/tech/tk583/tk372/technologies_configuration_example09186a00801dddbb.shtml

HTH>

jmcandelera · ‎10-23-2008

Hello Andrew,

I read your suggested documents and I added isakmp authorization in the vpnclient profile. Afther that, the problem was solved:

aaa authorization network groupauthor local

crypto isakmp profile vpnclient

isakmp authorization list groupauthor

Thanks a lot for your help.

Juanma

andrew.prince · ‎10-23-2008

np - glad to help.