10-22-2008 01:09 AM - edited 03-04-2019 12:01 AM
Hello All,
In an attempt to install a 3640 series i encountered the following which hampered the installation, any help how how to go about it?.
Do not start the sending program yet...
File size Checksum File name
32031472 bytes (0x1e8c2f0) 0xd51f c3640-js-mz.124-13b (bad checksum: 0x37b9)
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c3640-jk9s-mz.124-16 ...
BB0
ERR:Image size exceeds free flash space
rommon 3 >
How can i make space available for the installation if that is the problem?.
Thanking you all in advance,
Regards
10-22-2008 01:34 AM
Looks like to need to remove any files for images from the flash, before you can copy the new image into it.
HTH>
10-22-2008 01:46 AM
Hello,
Many thanks for your response. But if at all i have to remove any file from the flash, which is it and how do i go about it?
Thanks
10-22-2008 01:51 AM
Follow the below instructions - there is an option to erase the flash before the xmodem copy takes place.
http://www.cisco.com/en/US/products/hw/routers/ps259/products_tech_note09186a008009433b.shtml
HTH>
10-22-2008 02:00 AM
Hi,
Sorry the link you sent does not contain solution to my problem. thanks any way.
Regards
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: