10-22-2008 05:33 AM - last edited on 03-25-2019 03:20 PM by ciscomoderator
Hello,
I have a Cisco 3845 with a Configuration register set as 0x2102.
A boot variable set to:
boot-start-marker
boot system flash c3845-advipservicesk9-mz.124-22.T.bin
boot system flash c3845-advipservicesk9-mz.123-14.T6.bin
boot-end-marker
and a flash file with the following:
1 -rw- 32232640 Nov 29 1983 23:00:00 -06:00 c3845-advipservicesk9-mz.123-14.T6.bin
.
.
.
9 -rw- 59161972 Oct 21 2008 14:01:02 -05:00 c3845-advipservicesk9-mz.124-22.T.bin
I want to boot to 12.4T first and if that fails boot to 12.3T. With my current setting every time I reboot the router it boots 12.3T. I know this is most likely a problem with my Configuration register set wrong, but I do not know what to change it to.
Please advise - Many thanks
Solved! Go to Solution.
10-22-2008 05:45 AM
Your config register looks okay. What do you see on the console when you reload the router ie. does it say it cannot find specified file. Assuming internal flash is the location of these images try
boot system flash flash:c3845-advipservicesk9-mz.124-22.T.bin
boot system flash flash:c3845-advipservicesk9-mz.123-14.T6.bin
Jon
10-22-2008 05:45 AM
Your config register looks okay. What do you see on the console when you reload the router ie. does it say it cannot find specified file. Assuming internal flash is the location of these images try
boot system flash flash:c3845-advipservicesk9-mz.124-22.T.bin
boot system flash flash:c3845-advipservicesk9-mz.123-14.T6.bin
Jon
10-22-2008 06:26 AM
That did it - Thanks for the help!
10-22-2008 06:27 AM
That did it - Thanks for the help!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: