Richard Burts Wed, 10/22/2008 - 09:58
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Juan


I do not have direct personal experience with this, so I checked the Feature Navigator on CCO. It indicates that with the IP PLUS or with Enterprise Plus feature sets that DLSW+ is supported on the 4500.


HTH


Rick

juanluis@ingenia.es Wed, 10/22/2008 - 10:10
User Badges:

Thanks a lot. DO you mean that there is a ios i mage for the 4500 and sup V that support DLSW and bridge?


I have enter in the web but I dont find anything as you say. Could you send me the url, please?.


I need to confirm that this feature is avalaible, so I could open a case and ask the ios to cisco.


If you answer yes to my first question I will be a very happy man!


Regards

Juan Luis.

Richard Burts Wed, 10/22/2008 - 10:41
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Juan Luis


What I find is not specific about the Sup V. But the feature navigator does say that this image c4500-js-mz.122-23.bin does have support for bridging between 802.1Q VLANs and does have support for DLSW+.


You can use the feature navigator at this URL:

www.cisco.com/go/fn

and it has options to check by feature, by platform, or by spacific image.


HTH


Rick

juanluis@ingenia.es Thu, 10/23/2008 - 00:54
User Badges:

Are you sure this is for Catalyst 4500 with supervisor V?


In the feature navigator I don't find anything about your version for the catalyst 4500.

Richard Burts Thu, 10/23/2008 - 07:22
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Juan Luis


Are you saying that you went to the Feature Navigator (at www.cisco.com/g/fn), that you selected the option to search for a particular release, that you specified image c4500-js-mz.122-23.bin and that it could not find this image?


HTH


Rick

juanluis@ingenia.es Thu, 10/23/2008 - 07:54
User Badges:

Yes,

When I search a release selecting the Catalyst 4500 and sup V I dont find the file you say.


The file c4500-js-mz.122-23.bin is for Catalyst 4500 sup V or it is for router 4500?


If it is for catalyst, how or where can I get it?


Regards,

Juan Luis.

Richard Burts Thu, 10/23/2008 - 08:52
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Juan Luis


It appears that this image is indeed for the router 4500. my mistake. I appologize. Based on this I was incorrect to say that there was support for DLSW in the Cat4500. Having looked again I believe that DLSW is not supported on this platform.


Sorry


Rick

juanluis@ingenia.es Thu, 10/23/2008 - 09:43
User Badges:

No problem


Thank you very much. I will use a external router to run dlsw.


I have 2 4506 and 2 routers and must work redundant, if it is not very umpleasant for you, I would like send you the configs so you can take a look and tell me if there is any mistake. You seem to know very much about this.


Thanks for all.


Regards

Juan Luis.

Richard Burts Thu, 10/23/2008 - 09:56
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Juan Luis


If you send the configs I will take a look at them.


HTH


Rick

Actions

This Discussion