WLC ISSUE

vaibhav-g · ‎10-22-2008

Hi Team

1. how can we use all the six antennas of a Cisco 1252 Access point? (we are able to use 2.4Ghz radios but not 5GHz )

2. Any configuration required in WLC or access point to have 300 Mbps downlink/uplink to a wireless client?

3. Which wireless adapters (like intel) in laptops will support the 802.11n - 300 Mbps downlink/uplink?

plse let me know the solution.

Regards

Vaibhav

andrew.prince · ‎10-23-2008

1. See 2

2. Yes - you need to enable 802.11n radios

3. You need to check with your hardware vendor.

HTH>

vaibhav-g · ‎10-23-2008

Hi

Could you elaborate the solution for all those problems.

if possible plse provide document on this.

Regards

Vaibhav