10-22-2008 11:22 PM - edited 03-01-2019 02:08 PM
Hello!
I got a lot of input errors/ignored packets on interfaces of our NPE-G2 router. Interfaces use a different queue strategy, but got same situation with input errors. First of all i change media on gi0/2 (thinking about bad cable RJ45) and now it use a optical sfp . But situation didn't change.
GigabitEthernet0/1 is up, line protocol is up
Hardware is MV64460 Internal MAC, address is 0019.2f78.461b (bia 0019.2f78.461b)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 11/255, rxload 27/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, media type is RJ45
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 13w5d
Input queue: 0/75/18534/90398 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 108525000 bits/sec, 21971 packets/sec
5 minute output rate 45369000 bits/sec, 20146 packets/sec
1387671978 packets input, 2665196373 bytes, 1205 no buffer
Received 16430889 broadcasts, 0 runts, 0 giants, 0 throttles
75473501 input errors, 0 CRC, 0 frame, 0 overrun, 75473501 ignored
0 watchdog, 53196817 multicast, 0 pause input
0 input packets with dribble condition detected
2760371580 packets output, 3837087205 bytes, 0 underruns
0 output errors, 0 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
GigabitEthernet0/2 is up, line protocol is up
Hardware is MV64460 Internal MAC, address is 0019.2f78.461a (bia 0019.2f78.461a)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 254/255, txload 27/255, rxload 11/255
Encapsulation 802.1Q Virtual LAN, Vlan ID 1., loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is autonegotiation, media type is SX
output flow-control is XON, input flow-control is XON
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 6w0d
Input queue: 0/75/1114388/219 (size/max/drops/flushes); Total output drops: 10324119
Queueing strategy: random early detection(RED)
5 minute input rate 45545000 bits/sec, 20594 packets/sec
5 minute output rate 108009000 bits/sec, 22278 packets/sec
829583144 packets input, 3483803993 bytes, 1070 no buffer
Received 499443 broadcasts, 0 runts, 0 giants, 0 throttles
1298834 input errors, 0 CRC, 0 frame, 0 overrun, 1298834 ignored
0 watchdog, 738486 multicast, 0 pause input
0 input packets with dribble condition detected
3006654928 packets output, 1596803089 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
1 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
Cisco IOS Software, 7200 Software (C7200P-ADVIPSERVICESK9-M), Version 12.4(4)XD3, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Thu 14-Sep-06 17:07 by hqluong
Any suggestions ?
10-23-2008 11:53 AM
Hi,
Looks like you are running into Bug ID CSCsf32623. The bug is fixed in 12.4(4)XD4
Please refer the below URL for details:
http://www.cisco.com/en/US/docs/ios/12_4/12_4x/release/notes/rn7000XD.html
Regards,
Arul
*Pls rate if it helps*
10-27-2008 02:14 AM
Thanks, this solved my problem.
I change ios from XD4 -> XD11.
10-27-2008 06:04 AM
Great! Glad to help.
Regards,
Arul
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: