10-23-2008 01:17 AM - edited 03-11-2019 07:01 AM
can i configure FWSM active-active failover in VSS 1440
10-23-2008 04:06 AM
Pradeep,
As of today, there is no IOS that will support FWSM with VSS. Having said that, you may need to wait for a IOS release that supports FWSM with VSS and then look at the configuration guidelines and limitations.
Regards,
Arul
*Pls rate if it helps*
10-30-2008 07:41 PM
We have a case (vss+fwsm+vrf) , We are testing . Ios is a big problem, because we are using cisco inside version, It has many problems,The key to problem is that FWSM's failover link can't pass through VSL (VSS),If you have two 6509 and two FWSM in each box.
11-14-2008 08:31 AM
Pradeep,
FYI.. 12.2(33)SXI for the Catalyst 6500 has been posted on CCO and this version of software does support FWSM with VSS.
Release Notes for the Catalyst 6500 Series and Cisco 7600 Series Firewall Services Module, 4.0(x)
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Regards,
Arul
*Pls rate if it helps*
11-14-2008 08:32 AM
Pradeep,
FYI.. 12.2(33)SXI for the Catalyst 6500 has been posted on CCO and this version of software does support FWSM with VSS.
Release Notes for the Catalyst 6500 Series and Cisco 7600 Series Firewall Services Module, 4.0(x)
http://www.cisco.com/en/US/docs/security/fwsm/fwsm40/release/notes/fwsmrn40.html
Regards,
Arul
*Pls rate if it helps*
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: