AIP-SSM recovery failure

Unanswered Question
Oct 23rd, 2008
User Badges:

Hi All,

I am trying to upgrade the AIP-SSM software from 5.x to 6.x , i dont know through which interface it contacts to TFTP server i.e external g0/0 or internal. It gives error of TFTP timeout and recovery is not completed. let me know how to upgrade or revert back to default.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
rhermes Thu, 10/23/2008 - 13:45
User Badges:
  • Gold, 750 points or more

If you have a working 5.x sensor that is reachable via the management interface (you can ssh or https into it), then you can use the upgrade ftp:// command.

But since you're mentioning TFTP, it sounds like you want to re-image, and not upgrade.

Installing the AIP-SSM system image

http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/cli/cliImage.html#wp1032373


hemant.bharati Fri, 10/24/2008 - 04:10
User Badges:

yes i am trying to reimage the AIP-SSM-10 module and tried with the hw-module module 1 recover configure command. Please tell where should i connect the TFTP server i.e G0/0 port or ?

rhermes Fri, 10/24/2008 - 14:26
User Badges:
  • Gold, 750 points or more

The AIP-SSM10 module has a management port on the module (it is the only external interface on the module). Connect this to the network that can reach your TFTP server.

Actions

This Discussion