Solved: CME Meet Me Conferencing

bschear · ‎10-23-2008

I have Call Manager Express 4.0(1). I was looking to upgrade to a newer CME version/CUE version to get some Meet Me conferencing capabilities without having to add a T1 card. First, I was wondering about DSP requirements and how to be sure I have enough DSPs for the Meet me conferencing. This is a small implementation with 2 4 port FXO cards in a 2811 and 16 DSPs. Next, can the meet me conferences be used with an outside resource if I setup an FXO to plar the specific port into whatever the meet me conference number I setup was?

dbenattou · ‎10-23-2008

hello,

you can use the following configuration :

voice-card 0

no dspfarm

dsp services dspfarm <----- don't forget this command otherwise you can't add many of the other configs!

!

voice class custom-cptone leavetone

dualtone conference

frequency 400 800

cadence 400 50 200 50 200 50

!

voice class custom-cptone jointone

dualtone conference

frequency 600 900

cadence 300 150 300 100 300 50

!

sccp local FastEthernet0/0

sccp ccm 10.66.75.79 identifier 1 version 4.0

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 2 register confprof2

!

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 8

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

no shutdown <----- need to manually add the no shut after the profile has been created

!

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 3

sdspfarm unregister force

sdspfarm tag 2 confprof2

<>

!

ephone-template 2 <---- New template needed to add the extra softkeys

softkeys hold Join Newcall Resume Select

softkeys idle Cfwdall ConfList Dnd Join Newcall Pickup Redial RmLstC

softkeys seized Endcall Redial Meetme Cfwdall Pickup

softkeys connected ConfList Confrn Endcall Hold Join Park RmLstC Select Trnsfer

!

ephone-dn 1 dual-line

number 4001

!

ephone-dn 2 dual-line

number 4002

!

ephone-dn 3 dual-line

number 4003

!

ephone-dn 21 dual-line <------ 4 dual line DN's should allow an 8 party conference

number 6788

conference meetme

no huntstop

!

ephone-dn 22 dual-line

number 6788

conference meetme

preference 1

no huntstop

!

ephone-dn 23 dual-line

number 6788

conference meetme

preference 1

no huntstop

!

ephone-dn 24 dual-line

number 6788

conference meetme

preference 3

!

ephone 1

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0012.DAFA.7D33

button 1:1

!

ephone 2

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0003.6BC3.83E9

button 1:2

!

ephone 3

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0012.D9D6.A017

type 7960

button 1:3

!

View solution in original post

joel · ‎10-23-2008

I used the DSP calculator, and based on the model of router and the cards, it shows the number of conferences you can do...

http://www.cisco.com/pcgi-bin/Support/DSP/cisco_prodsel.pl

This link shows how to configure Conferencing:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeconf.html

Do you want to have a DID for the meet me number?

To access from the outside, you are going to get only as many POTS lines you have.

dbenattou · ‎10-23-2008

hello,

you can use the following configuration :

voice-card 0

no dspfarm

dsp services dspfarm <----- don't forget this command otherwise you can't add many of the other configs!

!

voice class custom-cptone leavetone

dualtone conference

frequency 400 800

cadence 400 50 200 50 200 50

!

voice class custom-cptone jointone

dualtone conference

frequency 600 900

cadence 300 150 300 100 300 50

!

sccp local FastEthernet0/0

sccp ccm 10.66.75.79 identifier 1 version 4.0

sccp

!

sccp ccm group 1

associate ccm 1 priority 1

associate profile 2 register confprof2

!

dspfarm profile 2 conference

codec g711ulaw

codec g711alaw

codec g729ar8

codec g729abr8

codec g729r8

codec g729br8

maximum sessions 8

conference-join custom-cptone jointone

conference-leave custom-cptone leavetone

associate application SCCP

no shutdown <----- need to manually add the no shut after the profile has been created

!

telephony-service

sdspfarm conference mute-on 111 mute-off 222

sdspfarm units 3

sdspfarm unregister force

sdspfarm tag 2 confprof2

<>

!

ephone-template 2 <---- New template needed to add the extra softkeys

softkeys hold Join Newcall Resume Select

softkeys idle Cfwdall ConfList Dnd Join Newcall Pickup Redial RmLstC

softkeys seized Endcall Redial Meetme Cfwdall Pickup

softkeys connected ConfList Confrn Endcall Hold Join Park RmLstC Select Trnsfer

!

ephone-dn 1 dual-line

number 4001

!

ephone-dn 2 dual-line

number 4002

!

ephone-dn 3 dual-line

number 4003

!

ephone-dn 21 dual-line <------ 4 dual line DN's should allow an 8 party conference

number 6788

conference meetme

no huntstop

!

ephone-dn 22 dual-line

number 6788

conference meetme

preference 1

no huntstop

!

ephone-dn 23 dual-line

number 6788

conference meetme

preference 1

no huntstop

!

ephone-dn 24 dual-line

number 6788

conference meetme

preference 3

!

ephone 1

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0012.DAFA.7D33

button 1:1

!

ephone 2

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0003.6BC3.83E9

button 1:2

!

ephone 3

conference drop-mode creator

conference add-mode creator

ephone-template 2

mac-address 0012.D9D6.A017

type 7960

button 1:3

!

cyoonpeacecorps · ‎02-23-2016

Check this link below. It give you more clear example to setup hardware conference bridge in CME.

http://www.ipbalance.com/voip/voip-cucme/1448-cme-how-to-setup-hardware-conference-bridge-meetme-and-ad-hoc.html