NM-2CE1T1_PRI Support for voice requirements

Unanswered Question
Oct 23rd, 2008
User Badges:

We have a cisco 3800 series router with a 2CE1T1 module installed. We are trying to get a T1 supporting voice calls from an AVAYA switch up and operational. Is their a requirement for some DSP support as in the HDV module that we used previously for this to work. Do we need additional hardware.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
mchin345 Fri, 10/31/2008 - 11:45
User Badges:
  • Silver, 250 points or more

3800 router supports Voice

NM-2CE1T1-PRI is Data card it won't support voice.

If you need to support voice (NM-HDV with a VWIC-1MFT-T1)

This Hardware will support voice


This Discussion