I am configuring SRST on a 3825 running 12.4(15)XZ1.
I am trying to configure translation profiles under the call-manager-fallback section but the translations do not seem to be coming into effect before dial-peers are matched. This happens with both incoming and outgoing calls.
!
voice translation-rule 2
rule 1 /^4\(...\)/ /902076914\1/
rule 2 /^5\(...\)/ /902076915\1/
rule 3 /^6\(...\)/ /902076916\1/
rule 4 /^1\(...\)/ /902085451\1/
rule 5 /^8\(...\)/ /902078618\1/
!
voice translation-profile SRST_Outbound
translate called 2
call-manager-fallback
secondary-dialtone 9
max-conferences 12 gain -6
transfer-system full-consult
limit-dn 7911 2
limit-dn 7936 2
limit-dn 7941 2
timeouts interdigit 3
ip source-address 10.180.82.129 port 2000 strict-match
max-ephones 350
max-dn 960 dual-line preference 6
system message primary CUCM Down, SRST is Active
dialplan-pattern 1 73.... extension-length 4
no huntstop
translation-profile outgoing SRST_Outbound
time-format 24
date-format dd-mm-yy
I am not sure why the dial-peer matching occurs before the translation profile is applied. I am sure that I have used this type of configuration in the past.
The details of the SRST service are shown below:
show call-manager-fallback
CONFIG (Version=7.0(0))
=====================
Version 7.0(0)
For on-line documentation please see:
http://www.cisco.com/en/US/products/sw/voicesw/ps4625/tsd_products_support_series_home.html
ip source-address 10.180.82.129 port 2000 strict-match
max-ephones 350
max-dn 960 dual-line preference 6
max-conferences 12 gain -6
dspfarm units 0
dspfarm transcode sessions 0
no huntstop
no huntstop channel
dialplan-pattern 1 73.... extension-length 4
translation-profile outgoing SRST_Outbound
voicemail 902076916999
cnf-file location: system:
cnf-file option: PER-PHONE-TYPE
network-locale[0] US (This is the default network locale for this box)
network-locale[1] US
network-locale[2] US
network-locale[3] US
network-locale[4] US
user-locale[0] US (This is the default user locale for this box)
user-locale[1] US
user-locale[2] US
user-locale[3] US
user-locale[4] US
srst mode auto-provision is OFF
srst ephone template is 0
srst dn template is 0
srst dn line-mode single
time-format 24
date-format dd-mm-yy
timezone 0 Greenwich Standard Time
secondary-dialtone 9
call-forward busy 902076916999
call-forward noan 902076916999 timeout 12
no transfer-pattern is configured, transfer is restricted to local SCCP phones only.
alias 1 3500 to 3502 preference 1
alias 2 3500 to 3503 preference 2
alias 3 3500 to 3504 preference 3
alias 4 3500 to 3581 preference 4
alias 5 3500 to 3511 preference 5
keepalive 30 auxiliary 30
timeout interdigit 3
timeout busy 10
timeout ringing 180
timeout transfer-recall 0
timeout ringin-callerid 8
timeout night-service-bell 12
caller-id name-only: enable
system message primary CUCM Down, SRST is Active
Limit number of DNs per phone:
12SP: 56
7902: 56
7905: 56
7906: 56
7910: 56
7911: 2
7912: 56
7920: 56
7921: 56
7931: 56
7935: 56
7936: 2
7937: 56
7940: 56
7941: 2
7941GE: 56
7942: 56
7945: 56
7960: 56
7961: 56
7961GE: 56
7962: 56
7965: 56
7970: 56
7971: 56
7975: 56
7985: 56
anl: 56
ata: 56
bri: 56
CIPC: 56
vgc-phone: 56
Log (table parameters):
max-size: 150
retain-timer: 15
transfer-system full-consult
transfer-digit-collect new-call
local directory service: enabled.
Extension-assigner tag-type ephone-tag.
