Hi, it is the first time I use a PIX, and I am having problems with NAT.
I have a serveur with an Internal Ip address 192.168.230.13
at the outside and ip addres is use 10.5.5.3
So I did a translation rule to a static IP,from 10.5.5.3 on outside to inside serveur 192.168.230.13.
then I tried to add a translation rule tha would use the same destination:
translation rule static with port address translation from 10.5.5.4:8080 on outside to 192.168.230.13:8080 on inside.
The firewall tells me that the second rule overlaps the firstone. this causes no problems in other firewall.
How can I do this properly on a Pix?