7941 problems with bulk-speed-dial

Unanswered Question

We just upgrade de 7941 firmware from SCCP41.8-2-2SR1S to SCCP41.8-4-1SR1S.

Now we have a problem. From those phones, they can not use de bulk-speed-dial. These only happens since the firmware upgrade.

The CCME version is 4.1(0).

I have the bulk-speed-dial in telephony service. All the other phones can use the bulk speed dial. With the earlier firmware version, 7941 phones work just fine.

Any ideas ??

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
owillins Fri, 10/31/2008 - 08:21

1. Can you verify or if not do the following

- no create cnf / create cnf under telephony-service and reloaded the phones

2. You have the correct format for your bulk speed dial list.

You have these fields: prefix to dial; actual number wanting to dial; description; and then these two last fields are optional append and hide. Verify your configuration Use this command

show telephony-service bulk-speed-dial

Actions

This Discussion