10-24-2008 12:46 PM - edited 03-15-2019 02:09 PM
I have two 7920's at a remote location. They have the same firmware and appear to be configured identically. However, when side-by-side, one gets strong signals from both access points (relative to distance) but the other gets no signal unless it is directly under the access point. I suspecting a hardware problem involving the antenna, but I wanted to check to see if anyone else was have similiar problems.
If it matters, we are using CCM 4.3.
11-03-2008 02:55 PM
What type of AP do you have? Are you using a wireless controller to manage the AP? If it's a standalone AP, can you please capture a "show tech" and "show log" from the AP?
What's the firmware version on the phone?
11-03-2008 03:04 PM
I would agree that your suspicion is correct. Two wireless clients next to each other should receive ((approximately) the same RF signal level.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: