WAAS,, NO CME, Not Peering

ngods · ‎10-24-2008

Hi, I've got two WAEs in the lab, running without a CME, as Edge accelerators, connected to 3560s with WCCP. Going through all the docs and playing with it, I get the following results:

1) WCCP is up and enabled

2) Matching flows are seen on both WAEs

3) Each sees the other as a peer in "show stat tfo peer"

4) "show tfo connection sum" while FTPing shows failure of peering:

WAAS1#show stat tfo peer

Peer Id: 00:1a:64:f2:05:d1

Orig Bytes Read: 106746709

Orig Reads: 5414

Opt Bytes Reads: 117170

Opt Reads: 3197

Orig Bytes Written: 0

Orig Writes: 0

Opt Bytes Written: 40873679

Opt Writes: 7838

Number Encodes: 9645

Number Decodes: 7715

Active Connections: 0

Total Connections: 24

Last contact time: Wed Oct 22 14:36:53 2008

WAAS1#show tfo connection sum

Pass-Through Connections

Local-IP:Port Remote-IP:Port Conn Type

172.33.200.2:1524 192.168.250.42:21 PT App Cfg

192.168.250.42:20 172.33.200.2:1529 PT No Peer

192.168.250.42:21 172.33.200.2:1524 PT App Cfg

172.33.200.2:1528 192.168.250.42:20 PT No Peer

172.33.200.2:1529 192.168.250.42:20 PT No Peer

192.168.250.42:20 172.33.200.2:1528 PT No Peer