Point-to-Point Serial link Up-Down

Unanswered Question
Oct 24th, 2008

May i anseek urgent help from anyone with idea as to what the problem might be with the following configuration on a P-2-P serial link going up and down?.

ROUTER-A

interface Serial1/2

ip address 10.1.1.1 255.0.0.0

encapsulation frame-relay

end

ROUTER-B

interface Serial1/2

ip address 10.1.1.2 255.0.0.0

encapsulation frame-relay

clock rate 72000

end

Thanks for the help in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
bagvanliju Sat, 10/25/2008 - 06:58

Hai,

1)Try to change the encapsulation to HDLC and perform a end to end loop testing to verify Physical media is tru...once is done ..will come to know were could be the issue...

2)check out put of both interface any crc erros/reliablity/interface reset ....

3)Is this a lab senario or live setup ...cz u are using /8 as subnet mask ....

let us know the status

ujil

Actions

This Discussion