I'm trying to modify incoming EIGRP metrics for a few networks. Below is a snippet from the config and the partial results of a "sh ip route"
router eigrp 1
no passive-interface Vlan1
no passive-interface GigabitEthernet1/0/1
no passive-interface GigabitEthernet1/0/2
offset-list 5 in 100 GigabitEthernet1/0/1
access-list 5 permit 10.1.0.0 0.0.255.255
sh ip route
D EX 10.200.210.1/32
[170/53760] via 10.0.0.1, 00:02:23, GigabitEthernet1/0/1
The route metric to 10.200.210.1/32 remains at 53760 with or without the offset-list.
What am I doing wrong??
I see the problem
I kept looking at the wrong route (10.200.210.1, not 10.1.0.0)....