ASA 5505 - Configuration review - help

Unanswered Question
Oct 26th, 2008


I have attached a copy of my configuration for an asa 5505. Can someone possibly review the current config and let me know why communications is permitted cross vlans however traffic can not connect to the public network via the abc and abc.lan.

Currently attempting to create 3 separate internal networks - VPN, DMZ and VOIP lines. All ACL's are standard permitting connection to any less secure network, but on the DMZ I permitted incomming traffic via port.

After reading multiple volumes of how to configure NAT statements I attempted to create multiple static one to one NAT statements. If anyone sees any thing else that is incorrectly configured please let me know.

Additional information Ping test from the asa can communicate out. Local lan connectivity is verified. I tried to use the packet tracer.. and it said that packets from source to destination were permitted??

Any help would be greatly appreciated.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion