Hi!
I have a problem with ATA186 registration (SCCP) with Cisco Call Manager Express 4.1.
Here is output of 'debug ephone messages and debug ephone register'
Oct 27 09:43.782: ephone-(42)[42] StationRegisterMessage (49/49/96) from 10.90.110.42
Oct 27 09:29:43.782: ephone-(42)[42] Register StationIdentifier DeviceName ATA001E7AC450E9
Oct 27 09:29:43.782: ephone-(42)[42] StationIdentifier Instance 1 deviceType 12
Oct 27 09:29:43.782: ephone-42[42]:stationIpAddr 10.90.110.42
Oct 27 09:29:43.782: ephone-42[42][ATA001E7AC450E9]:maxStreams 0
Oct 27 09:29:43.782: ephone-42[42][ATA001E7AC450E9]:protocol Ver 0x1
Oct 27 09:29:43.782: ephone-42[42][ATA001E7AC450E9]:phone-size 5404 dn-size 680
Oct 27 09:29:43.782: ephone-(42) Allow any Skinny Server IP address 10.90.103.1
Oct 27 09:29:43.782: ephone-42[42][ATA001E7AC450E9]:Found entry 41 for 001E7AC450E9
Oct 27 09:29:43.782: ephone-42[42][ATA001E7AC450E9]:phone duplicate association attempt on socket [42]
Oct 27 09:29:43.782: Failed SkinnyAssociatePhone for ATA001E7AC450E9 tag 42
Oct 27 09:29:43.782: Skinny register (phones=49/49/96) REJECT from IP 10.90.110.42
Oct 27 09:29:43.782: Sending message 0x48936C48 to phone 42, sock 42, tcb 0x47AA2480, SkinnyMessageID = StationRegisterRejectMessageID
Oct 27 09:30:03.695: Received message from phone 42, sock 42, tcb 0x47AA2480, SkinnyMessageID = StationAlarmMessageID
Oct 27 09:30:03.695: %IPPHONE-6-REG_ALARM: Name=ATA001E7AC450E9 Load=ATA030203SCCP051201A.zup Last=Initialized
Oct 27 09:30:03.695: Skinny StationAlarmMessage on socket [42] 10.90.110.42 ATA001E7AC450E9
Oct 27 09:30:03.695: severityInformational p1=0 [0x0] p2=0 [0x0]
Oct 27 09:30:03.695: Name=ATA001E7AC450E9 Load=ATA030203SCCP051201A.zup Last=Initialized
Oct 27 09:30:03.795: Received message from phone 42, sock 42, tcb 0x47AA2480, SkinnyMessageID = StationRegisterMessageID
Oct 27 09:30:03.795: Received StationRegisterMessage from phone ATA001E7AC450E9, sock 42, tcb 0x47AA2480
Oct 27 09:30:03.795: ephone-(42)[42] StationRegisterMessage (49/49/96) from 10.90.110.42
Oct 27 09:30:03.795: ephone-(42)[42] Register StationIdentifier DeviceName ATA001E7AC450E9
Oct 27 09:30:03.795: ephone-(42)[42] StationIdentifier Instance 1 deviceType 12
Oct 27 09:30:03.795: ephone-42[42]:stationIpAddr 10.90.110.42
Oct 27 09:30:03.795: ephone-42[42][ATA001E7AC450E9]:maxStreams 0
Oct 27 09:30:03.795: ephone-42[42][ATA001E7AC450E9]:protocol Ver 0x1
Oct 27 09:30:03.795: ephone-42[42][ATA001E7AC450E9]:phone-size 5404 dn-size 680
Oct 27 09:30:03.795: ephone-(42) Allow any Skinny Server IP address 10.90.103.1
Oct 27 09:30:03.795: ephone-42[42][ATA001E7AC450E9]:Found entry 41 for 001E7AC450E9
Oct 27 09:30:03.795: ephone-42[42][ATA001E7AC450E9]:phone duplicate association attempt on socket [42]
Oct 27 09:30:03.795: Failed SkinnyAssociatePhone for ATA001E7AC450E9 tag 42
Oct 27 09:30:03.795: Skinny register (phones=49/49/96) REJECT from IP 10.90.110.42
Oct 27 09:30:03.795: Sending message 0x48936C48 to phone 42, sock 42, tcb 0x47AA2480, SkinnyMessageID = StationRegisterRejectMessag
ATA tries to register with CCME, but CCME discards registration with reply
Oct 27 09:31:09.775: ephone-42[46][ATA001E7AC450E9]:Found entry 41 for 001E7AC450E9
Oct 27 09:31:09.775: ephone-42[46][ATA001E7AC450E9]:phone duplicate association attempt on socket [46]
Oct 27 09:31:09.775: Failed SkinnyAssociatePhone for ATA001E7AC450E9 tag 42
Here is ATA ephone configuration
ephone 42
device-security-mode none
mac-address 001E.7AC4.50E9
paging-dn 33
codec g729r8
type ata
button 1:53
!
And here is ephone 41 (CCME thinks that ATA already associated with id 41
ephone 41
device-security-mode none
ephone-template 1
mac-address 0019.AA68.377C
paging-dn 33
type 7912
button 1:26
!
I tried to remove all telephone-service configuration and aply it again. All ephones registered with different IDs but this ATA has the same problem - CCME thinks that this MAC is already associated with previous ephone ID.
Arseny
