I'm using Cisco PIX 515E with 8.0(3) image.
I have 3 networks.
VPN local pool is 10.0.0.0/28.
I'm using remote access VPN to reach IN servers without problems(I used howto from Cisco pix conf. guide)
I would like to reach IN2 servers, but I don't know to setup NAT from vpn pool to this network(IN2).
nat (IN) 66 10.0.0.0 255.255.255.240
global (IN2) 66 188.8.131.52
but this doesn't work.