10-27-2008 06:29 AM
Hello,
I'm using Cisco PIX 515E with 8.0(3) image.
I have 3 networks.
IN 172.16.0.0/16
IN2 173.16.0.0/16
OUT 174.16.0.0/16.
VPN local pool is 10.0.0.0/28.
I'm using remote access VPN to reach IN servers without problems(I used howto from Cisco pix conf. guide)
I would like to reach IN2 servers, but I don't know to setup NAT from vpn pool to this network(IN2).
I tried
nat (IN) 66 10.0.0.0 255.255.255.240
global (IN2) 66 173.16.0.5
but this doesn't work.
Many thanks
Vladislav
10-27-2008 12:46 PM
access-list nat0 extended permit ip 173.16.0.0 255.255.0.0 10.0.0.0 255.255.255.240
nat (IN2) 0 access-list nat0
10-27-2008 01:29 PM
Thanks but, I need translate VPN hosts(10.0.0.0/28) in IN2 network.
How can I do this?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide