Config WLAN override in CLI

Answered Question
Oct 27th, 2008
User Badges:

I currently have case open with TAC where my LWAPs are losing their override settings . The workaround that I was given is to manually adding SSIDs to the override settings via the GUI. The GUI sucks for this. Can't do text search and you can't sort the columns.


Is there a command to add SSID to the override settings in CLI?

Correct Answer by Rob Huffman about 8 years 8 months ago

Hi Wilfred,


Using the CLI to Enable WLAN Override


To enable the WLAN Override option using the controller CLI, enter this command:


config ap wlan enable {802.11a | 802.11b} cisco_ap


To define which WLANs you wish to transmit, enter this command:


config ap wlan add {802.11a | 802.11b} wlan-id cisco_ap



From this good doc;


http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1114777



Hope this helps!

Rob

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Rob Huffman Tue, 10/28/2008 - 07:25
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Wilfred,


Using the CLI to Enable WLAN Override


To enable the WLAN Override option using the controller CLI, enter this command:


config ap wlan enable {802.11a | 802.11b} cisco_ap


To define which WLANs you wish to transmit, enter this command:


config ap wlan add {802.11a | 802.11b} wlan-id cisco_ap



From this good doc;


http://www.cisco.com/en/US/docs/wireless/controller/4.0/configuration/guide/c40wlan.html#wp1114777



Hope this helps!

Rob

mwilson706 Tue, 11/18/2008 - 12:58
User Badges:

Also, verify the templates that are being pushed out have the correct wlan override settings if multiple people manage the WCS.

Actions

This Discussion

 

 

Trending Topics - Security & Network