cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
615
Views
0
Helpful
7
Replies

7970 and incorrect time displayed

kiru
Level 1
Level 1

today we noticed only our 7970 phones are ahead by an hour. they are all on latest firmware. any ideas?

7 Replies 7

Adrian Saavedra
Level 7
Level 7

Hi friend,

Check this for setting date & time parameters for IP Phones in CME:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesystm.html#wp1012871

Best regards,

- Adrián.

we are on ccm 4.x

Are they in a different device pool? One that has a different date/time group?

Randall

ERRIN MILLER
Level 1
Level 1

I ran into a similar problem, but some of my 7970's were not at the most recent version of firmware, and wouldn't download the newer version. We worked with TAC and eventually had to get these older phones replaced. SCCP70.8-3-4SR1S is currentl loaded.

we are on 8.3-4 sr1s

What version of CM are you running including ES or SR?

Check this link to make sure you have the latest OS and CM patches.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: