High CPU utilization on core WAE 7326 running 4.1.1b

Unanswered Question
Oct 27th, 2008

I have just noticed that the CPU utilization on my core WAE is averaging 96%,is this normal? If the CPU utilization report is to believed, then when I was running 4.0 the utilization was only 4%

I have 19 remote sites with WAE 612 their average utilization is about 7%

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Zach Seils Wed, 10/29/2008 - 03:08

Richard,

Are you referring to the CPU statistics displayed in the Central Manager? Can you confirm the CPU utilisation from the CLI of the WAE (sh proc sys)?

Zach

Richard Bradfield Wed, 10/29/2008 - 19:43

This was the statistics from the CM, from CLI get

CPU average usage since last reboot:

cpu: 0.16% User, 6.04% System, 47.50% User(nice), 46.30% Idle

--------------------------------------------------------------------

but I notice today the CM utilization matches the CLI, it has dropped down to about 50%

Richard.

Zach Seils Mon, 11/03/2008 - 13:35

Thanks Richard. The 'sh proc cpu' output shows the average utilisation since the last reload, so it's not necessarily showing us the current state.

Can you please send me the output of the command 'sh proc sys count 10 delay 5'?

Thanks,

Zach

Richard Bradfield Wed, 11/05/2008 - 14:59

Zach,

please find enclosed requested info the CPU_UTIL.docx contains the graph fro the dentral manager for last hour, and the SYSCOUNT.txt contains the cli output you requested

i reloaded the WAE this morning so has only been up a couple of hours

Attachment: 
Zach Seils Mon, 11/17/2008 - 05:24

Thanks Richard,

The real time statistics show the CPU utilisation at ~ 23%. Let me talk to see some people internally and find out what additional information we need to troubleshoot this problem.

Zach

Actions

This Discussion