I don't want to create Command Authorisation sets just used a priv level. I'm having trouble determining what commands are assigned to what priv level?
By default, there are three command levels on the router:
privilege level 0 - Includes the disable, enable, exit, help, and logout commands.
privilege level 1 - Normal level on Telnet; includes all user-level commands at the router> prompt.
privilege level 15 - Includes all enable-level commands at the router# prompt
Commands at level 2-14 are blank by default BUT you always have access to all commands at your level and below so if you are at level 4 you have access to commands at levels 0 and 1
Hope that helps, rate if it does