10-28-2008 06:56 AM - edited 03-18-2019 09:53 PM
I have a PC with 2 NIC cards (2 MAC Addresses).
For trainning purposes, I want to run two instances of IP Communicator each one with one MAC Address.
How can I do it?
Thanks in advance!
Luisa
10-28-2008 08:17 AM
Luisa,
To my knowledge, you cannot do this with IPC. However, it is possible with IP Blue's VTGO-PC. Take a look at the following link.
http://www.ipblue.com/products_vtgo_lite.asp
Hope this helps.
Brandon
10-28-2008 01:31 PM
Ok,
Thank you very much to both of you!
10-28-2008 08:47 AM
Brandon is right, IPBlue will allow you to run multiple instances on one machine.
There is a good tutorial on how to accomplish this at http://www.blindhog.net/how-to-run-multiple-ip-blue-softphones-on-a-single-pc/
Please Rate if Helpful
10-28-2008 01:39 PM
If you have both IP Communicator and IPBlue, you can run both of them on one PC simultaneously. You can use any device name in CIPC instead of MAC so that one NIC is working well.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide