Hi I want to setup VPN using RADIUS (WIndows). We have a 256Kbps dedicate internet link terminated on the serial connection of our 1841 router. I want to enable clients to VPN in our network and use the network resources.
Need help in setting this up. What will I need e.g updated IOS or module etc and the configd. Below is the show version of my router:
Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(2)XA, RELEASE SOFTWARE (fc3)Synched to technology version 12.4(3.9)T
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Sun 09-Oct-05 23:35 by ealyon
ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)
ROM: Cisco IOS Software, 1841 Software (C1841-BROADBAND-M), Version 12.4(2)XA, R
ELEASE SOFTWARE (fc3)
SPC-NABUA uptime is 3 weeks, 1 day, 1 hour, 4 minutes
System returned to ROM by power-on
System image file is "flash:c1841-broadband-mz.124-2.XA.bin"
Cisco 1841 (revision 6.0) with 115712K/15360K bytes of memory.
Processor board ID FHK1114121H
2 FastEthernet interfaces
1 Serial(sync/async) interface
DRAM configuration is 64 bits wide with parity disabled.
191K bytes of NVRAM.
31488K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102