ASA 5510 to Contivity 1010

Unanswered Question
Oct 29th, 2008
User Badges:

I am working on a VPN L2L connection from an ASA 5510 to Nortel Contivity 1010. I can get the tunnel up and passing traffic. But it is only in 1 direction, from the Nortel side to the ASA side. Also I can't ping from either side to the other. Outlook, files sharing, etct works just fine but no icmp.

I am permitting all traffic to and from both sides, and both sides are telling me it is passing the traffic but it is not.

I have tried this with and without a permit any any ACL on the ASA. And it didn't make any difference.

Anyone have any ideas?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Anonymous (not verified) Tue, 11/04/2008 - 14:37
User Badges:

If you have extra globally routable iP address you can setting up static for the nortel vpn client host.Also modified the ACLs to account for the new static as Nortel VPN client doesn't support NAT traversal


This Discussion