MeetingPlaceExpress: Configuration for internal and external VideoConferenc

Unanswered Question
Oct 30th, 2008
User Badges:


I need to install on a Customer a MeetingPlaceExpress System. I have 2 servers and I need to make some VideoCOnference between Inside people and people from Internet.

How can I configure this 2 servers for this to work (IP of each servers? NAT? Comunication between inside server and DMZ server? )

If someone have doing this configuration before, can it give me an example?

Thanks in advance for your help,



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jonathan Schulenberg Fri, 10/31/2008 - 03:53
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

MPE doesn't provide video support directly through the web interface. All video participants must call in with an H.323 or SIP endpoint that is signaling through UCM... so the external participants will need to get to UCM somehow, presumably through a CUBE or CUSP at the edge.

baptiste.croizer Fri, 10/31/2008 - 05:29
User Badges:

I need to have a CUBE for this to work?

With just a Voice Gateway it's not working?

Other question: For an external user who have a H323 or SIP endpoint, how can he join the videoconference? To do a call to the numero of the videoconference? Or to put the MPE Server IP ?

Thanks for your help,


This Discussion