Solved: How to set Path for SFTP in CUCM Disaster Recovery?

Aun Iqbal · ‎10-31-2008

hi guys,

I am trying to restore backup on my cucm and unity connection through disaster recovery.

so I am trying to create a BACKUP DEVICE NAME first.

My sftp server is runnning on my laptop. its named SFTPSERVER

I need to enter the following info in CUCM Disaster recovery screena dn not sure what to enter in PATH (as its not accepting anything....

server name = SFTPSERVER (name of my SFTP server)

Path name = C:\sftpfile\ (is this the correct format or there is anotherone.... I also tried with \\SFTPSERVER\)

User name = admin (as it is set on my server)

password = cisco (as it is set on my server)

I think there is a problem with my path name. I am using titanFTP...

Please help.

Many thanks :)

Jaime Valencia · ‎10-31-2008

usually you define an SFTP folder within the program that is in your laptop.

then, that is the base directory so you just reference it as . or /

if you have another folder within the root SFTP then you add it to the path you're using

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Jaime Valencia · ‎10-31-2008

usually you define an SFTP folder within the program that is in your laptop.

then, that is the base directory so you just reference it as . or /

if you have another folder within the root SFTP then you add it to the path you're using

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

Aun Iqbal · ‎10-31-2008

thanks dude, I changed my software.

It works fine with free sftpd and much better software :)

and youa re right, just use \ for directory if you ahvent made any changes to sftp software :)

thanks :)

Labanelamia · ‎06-21-2016

what sftp did you use please ?, i can't find one that work !!!