10-31-2008 06:47 PM - edited 03-18-2019 09:55 PM
hi guys,
I am trying to restore backup on my cucm and unity connection through disaster recovery.
so I am trying to create a BACKUP DEVICE NAME first.
My sftp server is runnning on my laptop. its named SFTPSERVER
I need to enter the following info in CUCM Disaster recovery screena dn not sure what to enter in PATH (as its not accepting anything....
server name = SFTPSERVER (name of my SFTP server)
Path name = C:\sftpfile\ (is this the correct format or there is anotherone.... I also tried with \\SFTPSERVER\)
User name = admin (as it is set on my server)
password = cisco (as it is set on my server)
I think there is a problem with my path name. I am using titanFTP...
Please help.
Many thanks :)
Solved! Go to Solution.
10-31-2008 08:43 PM
usually you define an SFTP folder within the program that is in your laptop.
then, that is the base directory so you just reference it as . or /
if you have another folder within the root SFTP then you add it to the path you're using
HTH
java
if this helps, please rate
10-31-2008 08:43 PM
usually you define an SFTP folder within the program that is in your laptop.
then, that is the base directory so you just reference it as . or /
if you have another folder within the root SFTP then you add it to the path you're using
HTH
java
if this helps, please rate
10-31-2008 08:54 PM
thanks dude, I changed my software.
It works fine with free sftpd and much better software :)
and youa re right, just use \ for directory if you ahvent made any changes to sftp software :)
thanks :)
06-21-2016 05:40 AM
what sftp did you use please ?, i can't find one that work !!!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: