VG 248 not booting normal

Unanswered Question
Nov 2nd, 2008

Im having issue with our VG 248 Voice Gateway. This has been working for the pass couple of years now and all of a sudden the link starts to flap. We have change both cables and switch ports and it is still the same.

When I restart the gear with console cable to monitor the POST, this is what I get:

Cisco DAVROS Boot Loader

Copyright (c) 1999-2001 Cisco Systems, Inc.

All rights reserved.

Testing RAM.........passed

Version 1.0(1).

Decompressing image .........completed

Launching phase-2 boot image.........success

Testing FLASH.......passed

Testing EEPROM......passed

Testing Ethernet....passed

Pausing for FTP.....press Escape for boot loader menu

Info: Running Core

Info: Loading modules now...

Info: Loading and exporting module xml.mod

Info: Loading and exporting module configxml.mod

Error: Ethernet failed to start

Info: Loading and exporting module country.mod

Info: Loading and exporting module corex.sys

Info: Loading and exporting module snmp.mod

Info: Loading and exporting module gccs.mod

Info: Loading and exporting module slic.mod

Info: Loading and exporting module chorus.mod

I shut down the Ethernet to isolate the problem and it looks like this device is getting the config from another device via TFTP. When I re-enable the switch port, the boot is the same:

Cisco DAVROS Boot Loader

Copyright (c) 1999-2001 Cisco Systems, Inc.

All rights reserved.

Testing RAM.........passed

Version 1.0(1).

Decompressing image .........completed

Launching phase-2 boot image.........success

Testing FLASH.......passed

Testing EEPROM......passed

Testing Ethernet....passed

Pausing for FTP.....press Escape for boot loader menu

Info: Running Core

Info: Loading modules now...

Info: Loading and exporting module xml.mod

Info: Loading and exporting module configxml.mod

Info: Loading and exporting module country.mod

Info: Loading and exporting module corex.sys

Info: Loading and exporting module snmp.mod

Info: Loading and exporting module gccs.mod

Info: Loading and exporting module slic.mod

Info: Loading and exporting module chorus.mod

Pressing escape doesn't do much as it takes me to boot loader menu use for Password Recovery or network config. Then loops back to the POST screen.

http://www.cisco.com/en/US/products/hw/gatecont/ps2250/products_password_recovery09186a008009440c.shtml

Any ideas?

Thanks

Peter

I have this problem too.
1 vote
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion